MTP 170 measuring range: 170x300 mm
MTP 170L measuring range: 170x380 mm
MTP is a machine designed to measure big-sized flat elements, offering maximum accuracy in quality control.
Its easy-to-use system and speed consent considerable reduction in terms of time and costs with accurate control and measurement of 100% of the production.
MTP is able to inspect multiple parts in one cycle, carrying out direct measurement and DXF profile comparison at the same time.
MTP effects measurement by means of a non-contact optical system. The system is made up of a linear camera and a telecentric back lighter, that effect vertical motions on the whole length of the piece.
The vision system creates a high-resolution image of the entire piece to be measured, that is then processed by means of powerful software analysis tools.
In the photo the machine is inspecting 35 lathed pieces in just 10 seconds. The speed of the machine combined with a rapid pallet change system makes it an unparalleled measuring device.
MTP consists of a strong aluminium frame made up of a fixed gantry and a movable table. The gantry, mounted directly on the mainframe of the machine with appropriate stiffening ribs, hosts the camera and the telecentric optics, in order to ensure no vibrations on the side of the camera.
Under the camera, inside the mainframe of the machine, is located the light source with a telecentric optic to address the light beam directly to the camera.
MTP is equipped with a horizontal movable table.
The stage is moved by a special belt system which ensures smooth movements and prevents the pieces from sliding during measurement.
In this way the operator can leave multiple parts on the table without the need to fix them with clamps or jigs.
The extractable stage provides easy access on three sides for an easy loading and unloading especially in case of multiple parts when operators are using both hands.
The measuring table performs a single and smooth movement along the Y direction. This ensures more stability in the shopfloor compared to machines with X-Y movements.
The measuring table exits completely from the protection area in order to offer a free access from the top extremely useful in case of automatic loading and unloading.
1. An intuitive graphic interface facilitates the operator's task by detecting the pieces that have not passed inspection, as well as those out of tolerance.
2. Function of automatic recognition of the position and orientation of the pieces, for the automatic orientation of the measurement tools.
3. MTP automatically collects all the necessary data for statistical purposes and is capable of producing a report for every single piece measured.
4. Measurements: length, distance, angle, radii, linearity, symmetry, perpendicularity, parallelism, measures for perimeter, comparison of the profile detected with DXF.
Sarbo S.p.A. 是一家专业生产车削小金属零件的领先公司。该公司正处于由Luciano Zago和Giuseppe Sartor向Paolo Zago和Ro···
