[ Time: 2020-08-13 Read: 2011 ]
When it comes to quality control of such complex parts, measuring crankshafts can be a cumber some and time-consuming process, possibly requiring an environmentally controlled room.
VICIVISION has developed a specific software tool dedicated to crankshaft measurements, able to provide dimensional control results of the highest accuracy. VICIVISION measurement systems offer a solution for specific dimensions of the eccentric pin:
Crankshaft Features to Measure:
· Stroke
· Diameter
· Roundness
· Cylindricity
· Run-out
· Timings
· Dynamic parallelism
· Radii
The software prov ides export to a DXF file of the pin radii before the rolling process, al lowing the operator to save it along with the part serial number.
After rolling the previously saved profile can be imported and compared with the actual profile in order to check the penetration parameters.
VICIVISION’ s optical measurement systems automatically collect data and produce a measurement report in under a minute.
Large volume manufacturer scan adjusts production parameter s based on measurement t rends. Adjusting parameter s in advance means avoiding out of tolerance results and consequent l y considerable reduction in rework while increasing yield.
With its tool wear in compensation function, the system can communicate with the CNC to automatically correct tool parameters.
Reducing inefficiencies translates into increased productivity, yield and throughput. This allows manufacturers the ability to run more product while increasing customer quality and satisfaction.
The machine improves productivity.
Operators are more independent during inspection and tool offsets can be adjusted before parts become out of tolerance in order to reduce the amount of rejects produced.
Dimensional control directly on the shop floor.
Each part produced by the CNC lathe can be easily measured by operators within the production environment.
Greater productivity also on smaller batches.
Batch changing is fast and efficient.
One measuring system for multiple CNC lathes.
One measuring system for multiple CNC lathes.
High resolution.
Detailed images capture even minute features.
No more compromises.
Given the wide scope of measurement ranges offered, this machine range is designed to adapt to current and future manufacturing demands.
Tested reliability.
Specific expertise and carefully selected components have created a highly efficient range of solutions.
Heavy Duty.
The load capacity of the largest machines has increased by up to 60 kg.
Techno Measuring Range:
Diameter: 40 mm-180 mm
Length: 300 mm-1250 mm
| Model | Measuring Range (mm) | Max. Loadable Sizes (mm) |
| M304 | 300x40 | 315x120 |
| M306 | 300x60 | 315x120 |
| M309 | 300x90 | 315x120 |
| M314 | 300x140 | 300x240 |
| M318 | 300x180 | 300x240 |
| M604 | 600x40 | 625x120 |
| M606 | 600x60 | 625x120 |
| M609 | 600x90 | 625x120 |
| M614 | 600x140 | 625x240 |
| M618 | 600x180 | 625x240 |
| M906 | 900x60 | 925x120 |
| M909 | 900x90 | 925x120 |
| M914 | 900x140 | 925x240 |
| M918 | 900x180 | 925x240 |
| M1209 | 1250x90 | 1300x120 |
| M1214 | 1250x140 | 1300x240 |
| M1218 | 1250x180 | 1300x240 |
Previous: VICIVISION | Fittings and Turned Threads: How to Measure Them In A Few Seconds
Next: no more
Unbeatable price-performance ratio.
Measuring Range (LXD): 160x60 mm-900x140 mm
Measuring Range (XY): 250x160 mm-315x315 mm
Measuring Height (Z): 160-250 mm
Find your way among more than 20 models.
Measuring Range (LXD): 300x40 mm-1250x180 mm
Measuring Range (XY): 420x520 mm-660x700 mm
Measuring Height (Z): 160-400 mm
The best way to measure small components.
Measuring Range (LXD): 100x8 mm-300x60 mm
Measuring Range (XY): 750x900 mm-1600x2560 mm
Measuring Height (Z): 160-400 mm
Field of View (Low Mag)/Depth of Field: 69.3x49.6 mm/30 mm
Field of View (High Mag)/Depth of Field: 17.3x12.4 mm/3 mm
MTP 170 measuring range: 170x300 mm
MTP 170L measuring range: 170x380 mm
